Advertisement
S10
S10 Sub Compact Line Array
•
The S10 is a sub-compact, 2-way, full range line array enclosure designed for extended throw capabilities. It
contains two symmetrically arrayed 10" transducers and a 4" compression driver mounted on an Adamson
waveguide.
•
Up to 20 S10 can be flown in the same array when using the Sub-Compact Support Frame (930-0020).
•
Due to the use of Controlled Summation Technology, the S10 maintains a consistent nominal horizontal
dispersion pattern of 110° down to 250Hz.
•
The high frequency waveguide is designed to couple multiple cabinets across the entire intended frequency band
without loss of coherence.
•
There are 9 rigging positions available, spanning 0° to 10°. Always consult Blueprint AV
Manual for correct rigging positions and proper rigging instructions.
•
Adamson's use of proprietary techologies such as Controlled Summation Technology and Advanced Cone
Architecture give the S10 an extremely high maximum SPL.
•
The nominal impedance of the S10 is 8 Ω per band.
•
The operational frequency range of the S10 is 60Hz to 18kHz, +/- 3 dB.
•
The S10 is intended to be used as a standalone system or with other S-Series products. The S10 is designed to
pair easily and coherently with all Adamson subwoofers.
•
The wooden enclosure is made of marine grade birch plywood, and has an aluminum and steel rigging system
mounted on each corner. Without sacrificing low resonance to composite material, the S10 is able to maintain a
low weight of 27 kg / 60 lbs.
•
The S10 is designed for use with Lab.gruppen's PLM+ Series amplifiers.
Adamson Systems Engineering |
S10 User Manual
and the S-Series Rigging
TM
Page 4
Advertisement
