Advertisement
Quick Links
Table of Contents
Safety & Warnings
Read these instructions, keep them available for reference.
This manual can be downloaded from
Heed all warnings and follow all instructions.
A qualifi ed technician must be present during the installation and use of this product. This product
is capable of producing extremely high sound pressure levels and should be used according to the
specifi ed local sound level regulations and good judgement. Adamson Systems Engineering will
not be liable for damages caused by any possible misuse of this product.
Servicing is required when the loudspeaker has been damaged in any way, such as when the
loudspeaker has been dropped; or when for undetermined reasons the loudspeaker does not
operate normally. Inspect your products regularly for any visual or functionality irregularities.
Protect the cabling from being walked on or pinched.
View the S-Series Rigging Tutorial video and/or read the S-Series Rigging Manual before suspending
the product.
Pay attention to rigging instructions included in both Blueprint and the S-Series Rigging Manual.
Use only with the rigging frames/accessories specifi ed by Adamson, or sold with the loudspeaker
system.
This speaker enclosure is capable of creating a strong magnetic fi eld. Please use caution around
the enclosure with data storage devices such as hard drives.
In an effort to continuously improve its products, Adamson releases
updated accompanying software, presets and standards for its products.
Adamson reserves the right to change the specifications of its
products and the content of its documents with no prior notice.
Adamson Systems Engineering |
__________________________________________________________________________________________
__________________________________________________________________________________________
__________________________________________________________________________________________
__________________________________________________________________________________________
__________________________________________________________________________________________
__________________________________________________________________________________________
__________________________________________________________________________________________
S7p User Manual
3
4
5
6
7
8
9
Page 1
Advertisement
Related Manuals for Adamson S Series
Summary of Contents for Adamson S Series
- Page 1 Pay attention to rigging instructions included in both Blueprint and the S-Series Rigging Manual. Use only with the rigging frames/accessories specifi ed by Adamson, or sold with the loudspeaker system. This speaker enclosure is capable of creating a strong magnetic fi eld. Please use caution around the enclosure with data storage devices such as hard drives.
- Page 2 S7p User Manual Distribution Date: August 15, 2022 Copyright 2022 by Adamson Systems Engineering Inc.; all rights reserved This manual must be accessible to the person operating this product. As such, the product owner must store it in a safe place and make it available upon request to any operator.
-
Page 3: Table Of Contents
Pay attention to rigging instructions included in both Blueprint and the S-Series Rigging Manual. Use only with the rigging frames/accessories specifi ed by Adamson, or sold with the loudspeaker system. This speaker enclosure is capable of creating a strong magnetic fi eld. Please use caution around the enclosure with data storage devices such as hard drives. -
Page 4: Product Introduction
S7p Ultra Compact Point Source • The S7p is an ultra-compact, full range point source enclosure designed with high output level and high clarity in mind. It contains two symmetrically arrayed 7” transducers and a 3” compression driver mounted on an Adamson waveguide. •... -
Page 5: Wiring
In Passive Mode, pins 1+/- are connected to the internal passive crossover, pins 2+/- are not connected. ULTRA COMPACT POINT SOURCE BI-AMPED PASSIVE S7p Jackplate PARALLEL PARALLEL INPUT INPUT PARALLEL PARALLEL INPUT INPUT S7p Internal Wiring - Bi-Amped Mode S7p Internal Wiring - Passive Mode S7p User Manual Adamson Systems Engineering | Page 5... -
Page 6: Amplification
The S7p is paired with Lab Gruppen PLM+ Series amplifiers. Maximum quantities of the S7p in Bi-Amped Mode or Passive Mode per amplifier model are shown below. For a master list, please refer to the Adamson Amplification Chart, found here, on the Adamson website. Bi-Amped Mode... -
Page 7: Presets
Adamson Load Library, contains presets designed for a variety of S7p applications, including both Bi-Amped and Passive modes. Furthermore, there are presets designed to pair with either Adamson subs, or Adamson line arrays. For a master list, please refer to the Adamson PLM &... -
Page 8: Technical Data
136.5 dB (135 dB in passive) Components LF 2x ND7-LM16 7” Kevlar® Neodymium Driver Components HF Adamson NH3-8 3” Diaphragm / 1.4” Exit Compression Driver Bi-Amped Nominal Impedance LF 2 x 16 Ω (8 Ω) Bi-Amped Nominal Impedance HF 8 Ω... -
Page 9: Accessories
Accessories There are a number of accessories available for the Adamson S7p point source cabinets The list below is only a few of the many available accessories. Ultra-Compact Horizontal Bracket (934-0033) S7p/CS7p Horizontal Yoke Ultra-Compact Vertical Bracket (934-0036) S7p/CS7p Vertical Yoke...