Other Functions; Vrx935Vd - Clarion ProAudio VRX 935VD VRX935VD VRX935VD Owners & Installation Manual

Other Functions

Always turning on the button
illumination on the operation panel
Notes:
• The following operation is enabled when the
panel is open.
• Doing this operation turns on and off the
illunination only for the buttons of VOL [+] and [–],
[DISP], and [OPEN].
The button illumination on the operation panel
when the display is turned upward, can be
switched between "ON" and "OFF".
The factory default setting is ON.
G"OFF": Button illumination on the operation
panel turns on for 5 seconds;
G"ON": Button illumination is always on when
the power is turned on;
1. When the panel is open, press the [ADJ]
button to show the ADJUST MODE menu.
2. Touch the [ ] key to select "UPPER ILLUMI".
3. Touch the [UPPER ILLUMI] key to select
"ON" or "OFF".
4. Touch the [ON] or [OFF] key for setting.
5. Press the [ADJ] button or touch the [RTN]
key to return to the previous mode.
∗ To set "ON" again, switch "OFF" to "ON" manually.
Entering titles
Titles up to 10 characters long can be stored in
memory and displayed for Radio stations, TV
stations and CD changer. The numbers of titles
that can be entered for each mode are as follows.
Mode
TUNER mode
TV mode
CD changer mode
CDC655z connected
CDC655Tz connected
CDC1255z connected
DCZ625 connected
∗ You cannot enter titles with the unit in Seek, Preset
Scan, Auto store (TUNER or TV) mode. Cancel
each of those operations before entering titles.
1. Press the [FUNC] button to select the mode
you want to enter a title (TUNER, CD
changer or TV).
2. Select and play a CD in the CD changer or
tune in to a Radio station or a TV station for
which you want to enter the title.
3. Touch the screen or press the [LIST] button,
the MENU screen appears.
Number of titles
30 titles
15 titles
Number of titles
60 titles
100 titles
50 titles
100 titles
4. Touch the [TITLE INPUT] key in the MENU
screen.
The title input mode display appears.
5. Touch the characters, symbols, etc. shown in
the display to input titles.
" " : Centering
"BS" : Backspace
" " : Space
"MEMO" : Memory
"z(w)" : Scroll
Notes:
• Up to 10 characters can be input.
• To switch the character types, touch the scroll key
( z ) at the lower left of the display.
6. Repeat the step 4 to enter the complete title.
7. Touch the [MEMO] key for 2 seconds or
longer to store the title into memory and
cancel title input mode.
Title list play
You can display a list of titles, then select the
disc or broadcast station to listen to from that
list.
∗ You can not display a title list with the unit in
Seek, Preset Scan, Auto store (Tuner or TV)
mode. Cancel those operation modes before to
display a title list.
1. With the unit in radio, CD/MD changer or TV
mode, touch the [P. CH SELECT], [DISC
SELECT] key. A title list is displayed. The
following functions can be carried out in a
title list display.
G TUNER: A title of a station stored in the
presets 1 to 6 or frequency is displayed;
G CD/MD changer: DISC titles for discs 1 to
6 are displayed (By changing over a
display page in case of 12-CD changer,
disc 7 to 12 can be displayed). When there
is not any disc in a changer, "NO DISC" is
displayed.
G TV: A title of a channel stored in the
presets 1 to 6 or a channel number is
displayed.
2. Touch the [DIRECT] key (1 to 6) to select
one of the items 1 to 6 and reproduce the
selected broadcast station or disc.
∗ In case of 12-CD changer, touch the [DISC
SELECT] key to change over to a list display
of discs 7 to 12.
3. Touch the [RTN] key again to return to the
previous mode.
53

VRX935VD