Vrx935Vd - Clarion ProAudio VRX 935VD VRX935VD VRX935VD Owners & Installation Manual

VISUAL Operations
Changing over monitor display size
∗ This function is available only when the panel is
open.
Notes:
• This function is not available while you are
driving.
• Switch to the VISUAL/DVD player(DVD video or
video CD)/DVD changer/TV mode you see.
1. Press the [DISP] button for 1 second or
longer to change over the monitor display
size. Each time you press the [DISP] button,
the monitor display size changes in the
following order:
"NORMAL" ➜ "WIDE" ➜ "F. WIDE" ➜
"CINEMA" ➜ "NORMAL"
G "NORMAL": (normal display)
There is a black area at both right and left
ends of a display. In case of normal TV
broadcasting (4:3), the image can be shown
without being cut or deformed.
G "WIDE": (wide mode)
The image at right and left ends in a display
elongates horizontally.
G "F. WIDE": (full wide mode)
The whole image elongates horizontally.
G "CINEMA": (cinema mode)
The image at both top and bottom in a
display disappears.
Notes:
• When a normal 4:3 size image, not being a wide
one, is viewed by displaying it fully on a wide
monitor display in a wide mode or a full-wide
mode, a part of the peripheral image will be
lacking or deformed. In deference to the intention
of producer, an original image can be viewed in a
normal mode.
• During superimposed display, it becomes a full-
wide mode.
• When the monitor display size mode is changed,
only the monitor display size indication
superimposed on the screen ("NORMAL",
"WIDE", "F.WIDE" or "CINEMA") will be changed,
then the corresponding display size mode will be
engaged.
44

VRX935VD

Monitoring the CCD camera
The CCD camera can be connected to this unit.
For the power supply of the camera, mount the
power box sold separately (CAA-188).
Note:
• This function is not available when the display is
stored.
Switching the 2-ZONE/3-ZONE
The front monitor lock and rear monitor lock
allows you to enjoy 2-ZONE and 3-ZONE.
2-ZONE:
Use the front monitor lock (or rear monitor lock)
to lock the receiver screen image (or image
from a separately sold rear monitor) to switch
the speaker sound to a sound mode that differs
from the sound accompanying the image.
3-ZONE
When a separately sold rear monitor is
connected, use the front or rear monitor lock to
lock the image of the receiver and that of the
rear monitor and to switch the speaker sound to
a sound mode that differs from the sound
accompanying the image.
Notes:
• The front monitor lock displays the image of an
external device (VTR, TV game console, etc.)
connected to the Visual 2 terminal.
• The rear monitor lock displays the image of an
external device (VTR, TV game console, etc.)
connected to the Visual 1 terminal.
• When a DVD changer connected to the CeNET is
connected to the Visual 1 terminal, the rear
monitor lock cannot be used.
• When 2-ZONE or 3-ZONE is used, the sound
from an external device (VTR, TV game console,
etc.) can only be heard from headphones
connected to the external device.
• A rear monitor is a separately sold accessory.