Intermec MicroBar 9710 User Manual page 3

This page records the changes to this manual. The manual was
released at Revision A. Please note that since the release of this
manual, we have switched to a numbered revision system.
B 8/91
-001 12/93
-002 7/95
-003 7/97
-004 11/97
Glossary, Index and information on multiple key
remapping were added.
A new parameter was added to UPC/EAN
code. You can decode UCC/EAN 128 from
Code 128 symbology. Some other minor
changes were made to Chapter 3.
Added one bar code (supplemental required) to
the fourth parameter of the UPC/EAN
symbology on page 3-34 and one correction to
page 3-24.
Added information about ISBT 128 bar code
symbology. Also combined the 9710 and 9720
manuals into one manual.
Corrected keyboard mapping tables in
Appendix.