Step 1: Bridge Girder Length (As Required); Step 2: Marking Centerline On The Girder (As Required) - Yale SHAW-BOX YK Series Assembly & Instruction Manual

STEP 1:
BRIDGE GIRDER LENGTH (AS REQUIRED)
* CHANNEL MUST BE A MINIMUM LENGTH OF THE SPAN MINUS 4'-0"
* GIRDER LENGTH TO BE DETERMINED BY SPAN LENGTH
RATED LOAD MINIMUM LENGTH
(Tons) OF BEAMS REQUIRED
3 Ton KIT SPAN + (1' - 4-1/2")
5 Ton KIT SPAN + (1' - 6-3/4")
STEP 2:
MARKING CENTERLINE ON THE GIRDER (AS REQUIRED)
Check your font configuration to see if a capping channel is required.
19 P/N: C11746310 REV. AB June 2022