Step 18: Festoon Runway Checking; Step 19: Adding Cable Ties - Yale SHAW-BOX YK Series Assembly & Instruction Manual

STEP 18:
FESTOON RUNWAY CHECKING
WARNING
Make sure all INSTALLATIONS AND START-UP
INSPECTIONS have been made in accordance
with instructions furnished with the HOIST and
TROLLEY before turning on the power.
Trolley stops (clip angles) or end stop assemblies must be installed on both ends of the bridge beam to prevent hoist
trolley from running off the end of the beam, which could result in injury to the operator and others and damage to
STEP 19:
ADDING CABLE TIES
WARNING
the load and other property.
65 P/N: C11746310 REV. AB June 2022