Step 1: Cut Girder And C-Channel (As Required); Step 2: Check Camber (As Required) - Yale SHAW-BOX YK Series Assembly & Instruction Manual

STEP 1:
CUT GIRDER AND C-CHANNEL (AS REQUIRED)
WARNING
Selection of structural steel beams must be verifi ed
by qualifi ed engineer. IT IS IMPORTANT THAT
ALL INSTRUCTIONS BE FOLLOWED AND THAT
COMPONENT APPLICATION LIMITS NOT BE
EXCEEDED.
Check your confi guration to see if a capping channel is required.
STEP 2:
CHECK CAMBER (AS REQUIRED)
CUT LENGTH TO BE DETERMINED BY SPAN LENGTH
9
P/N: C11746308 REV. AB June 2022