Numatic TTB4055 Quick Start Manual
Hide thumbs Also See for TTB4055:

Advertisement

DAILY
NUMATIC TWINTEC BATTERY
AFTER EVERY DAY, ENSURE
THAT YOU COMPLETE THE
FOLLOWING 6 STEPS
1.
Empty the recovery tank and rinse
thoroughly with clean water.
3.
Ensure the seperator seal is clean and
undamaged. Replace if necessary.
5.
IMPORTANT: Remove to clean under-
side of squegee from dirt and debris.
REPORT ALL DAMAGES AND TECHNICAL ISSUES TO THE SUPERVISOR
MAINTENANCE CHART
TTB4055
2.
Clean out the debris filter basket
located under the seperator hood.
4.
Clean suction pod filter in the
seperator hood behind the black flap.
6.
Plug the battery in for charging.
NTTB4055DMVNo1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TTB4055 and is the answer not in the manual?

Questions and answers

Summary of Contents for Numatic TTB4055

  • Page 1 DAILY MAINTENANCE CHART NTTB4055DMVNo1 NUMATIC TWINTEC BATTERY TTB4055 AFTER EVERY DAY, ENSURE THAT YOU COMPLETE THE FOLLOWING 6 STEPS Empty the recovery tank and rinse Clean out the debris filter basket thoroughly with clean water. located under the seperator hood.
  • Page 2 WEEKLY MAINTENANCE CHART NTTB4055WMVNo1 NUMATIC TWINTEC BATTERY TTB4055 AFTER EVERY WEEK, ENSURE THAT YOU COMPLETE THE FOLLOWING 4 STEPS Check all hoses for damage, holes and Thoroughly clean top seperator hood and seal. obstructions. Remove squegee and check for wear and Remove brushes/pad drives and damage.

Table of Contents