8
en | Installation
3
Installation
Power Supply
Please ensure that you have a good ground installation. That means:
–
–
–
–
The following notations for power signals are used:
–
–
–
Notice!
Be careful to observe current limits of wires and connector pins!
16.05.2018 | V 1.2 |
A ground that has a solid, low resistance connection to the negative battery terminal.
Connection should be free from dirt, grease, paint, anodizing etc.
Use large diameter wire.
More metal-to-metal contact is better!
KL 15 is a switched battery rail controlled by the IGN-switch.
KL 30 is an unswitched battery positive rail (same as battery positive terminal).
KL 31 is an unswitched ground rail (same as battery negative terminal).
Manual
Modular Sensor Interface M 60
Bosch Motorsport