Bosch M 60 Manual page 56

56 en | Analog and Frequency Inputs
7.
8.
9.
The channel is inserted into the M 60 Project Tree.
16.05.2018 | V 1.2 |
The third part of the 'Sensitivity/Offset Wizard' opens. Working with automatically
created measurement sheets is explained in chapter Setting up an online Measurement.'
a) Physical limits of channel.
b) Enter physical limits of the sensor.
c) Choose datatype of the measurement variable.
d) Checkbox to enable online calibration of offset and enter desired physical offset value.
e) Enter name to automatically create a new measurement sheet.
Click 'Finish' when done.
Enter channel name and description.
Click 'OK' when done.
a)
b)
a) Channel is linked to ANA04.
b) Available measurements for channel.
c) Input pin pull-up resistor is activated.
d) Sensitivity and offset value for sensor.
e) Adjustment is enabled.
c)
Manual
Modular Sensor Interface M 60
d) e)
Bosch Motorsport