Intermec IP30 User Manual page 24

Chapter 1 — Getting Started
6 When prompted to add the reader to your device list, tap Yes.
7 In the Passcode text box, enter the passcode for your reader.
8 Tap Next. The computer connects to the reader and displays
9 Tap Finish.
10 Refresh Intermec Settings to see the Bluetooth reader under
14
Note: The Devices list will show all data collection devices,
including RFID readers, that are Bluetooth enabled. To
connect to the right reader, verify the serial number you
selected matches the one located on the bottom of the
IP30's antenna.
The default passcode for Intermec Bluetooth readers is
0000.
the remote device information.
RFID. You can now configure and modify your device. For
help, see "Configuring RFID Settings" on page 17.
IP30 Handheld RFID Reader User's Guide