Intermec PW50 Instructions page 2
Handstrap
Hide thumbs
Also See for PW50:
- Installation manual (64 pages) ,
- User manual (52 pages) ,
- Quick start manual (2 pages)
Advertisement
3
Place the strap on the VELCRO pad, and route the strap through the adjuster
and D-ring as shown.
4 Close the VELCRO pad over the strap. You are now ready to use the printer with
the handstrap.
5
(Optional) Install another handstrap on the other side of the PW50.
PW50 Handstrap Instructions
*943-159-001*
P/N 943-159-001
VELCRO pad
D-ring
Adjuster
Strap
Worldwide Headquarters
6001 36th Avenue West
Everett, Washington 98203
U.S.A.
tel 425.348.2600
fax 425.355.9551
www.intermec.com
©
Corporation. All rights reserved.
2008 Intermec Technologies
Advertisement
