Using The Adjustable Shoulder Strap - Intermec EasyCoder PL3 Quick Start Manual

Using the Adjustable Shoulder Strap

The PL3 comes with a shoulder strap (P/N BT11132-1) for
your convenience.
To use the shoulder strap
1 Snap each end of the shoulder strap into the "D" rings on the
top of the printer.
2 Slide the buckle until you achieve the desired length.
Pull here
Pull here
to lengthen
to shorten
Hold
buckle
20
Snap into "D"
rings on printer
EasyCoder PL3 Printer Quick Start Guide