Where Do I Go From Here; Technical Support - RabbitCore RCM2000 Series Getting Started Manual

C-programmable module with ethernet

Hide thumbs Also See for RCM2000 Series:

Table of Contents

2.4 Where Do I Go From Here?

We recommend that you proceed to the next chapter and install Dynamic C (if you do not

already have it installed), then run the first sample program to verify that the RCM2200

module and the Prototyping Board are set up and functioning correctly.

If everything appears to be working, we recommend the following sequence of action:

1. Run all of the sample programs described in Section 3.4 to get a basic familiarity with

Dynamic C and the RCM2200 module's capabilities.

2. For further development, refer to the RabbitCore RCM2200 User's Manual for details

of the module's hardware and software components.

A documentation icon should have been installed on your workstation's desktop; click

on it to reach the documentation menu. You can create a new desktop icon that points to

in the

default.htm

3. For advanced development topics, refer to the Dynamic C User's Manual and the

Dynamic C TCP/IP User's Manual, also in the online documentation set.

NOTE: If you purchased your RCM2200 through a distributor or through a Z-World or

Rabbit Semiconductor partner, contact the distributor or Z-World partner first for tech-

nical support.

If there are any problems at this point:

• Check the Z-World/Rabbit Semiconductor Technical Bulletin Board at

www.zworld.com/support/bb/.

• Use the Technical Support e-mail form at www.zworld.com/support/support_submit.html.

• Call our Technical Support center:

Z-World Technical Support, (530) 757-3737.

Rabbit Semiconductor Technical Support, (530) 757-8400.

Getting Started

folder in the Dynamic C installation folder.

docs

Table of Contents

Do you have a question about the RCM2000 Series and is the answer not in the manual?

Rcm2200