Run A Sample Program; Where Do I Go From Here; Technical Support - RabbitCore RCM3000 Getting Started Manual

2.4 Run a Sample Program

If you already have Dynamic C installed, you are now ready to test your programming
connections by running a sample program.
Find the file , which is in the Dynamic C
PONG.C
open it with the menu (if it is not still open), compile it using the
File
then run it by selecting
play a small square bouncing around in a box.
This program shows that the CPU is working. The sample program described in
Section 4.9, "Run the PINGME.C Demo," tests the TCP/IP portion of the board.

2.5 Where Do I Go From Here?

We recommend that you proceed to the next chapter and install Dynamic C (if you do not
already have it installed), then run the
RCM3000 module and the Prototyping Board are set up and functioning correctly.
If everything appears to be working, we recommend the following sequence of action:
1. Run all of the sample programs described in Section 3.4 to get a basic familiarity with
Dynamic C and the RCM3000 module's capabilities.
2. For further development, refer to the RabbitCore RCM3000 User's Manual for details
of the module's hardware and software components.
A documentation icon should have been installed on your workstation's desktop; click
on it to reach the documentation menu. You can create a new desktop icon that points to
in the
default.htm
3. For advanced development topics, refer to the Dynamic C Premier User's Manual and
the Dynamic C TCP/IP User's Manual, also in the online documentation set.

2.5.1 Technical Support

NOTE: If you purchased your RCM3000 through a distributor or through a Z-World or
Rabbit Semiconductor partner, contact the distributor or partner first for technical support.
If there are any problems at this point:
• Check the Z-World/Rabbit Semiconductor Technical Bulletin Board at
www.zworld.com/support/bb/.
• Use the Technical Support e-mail form at www.zworld.com/support/support_submit.html.
14
in the menu. The
Run Run
PONG.C
folder in the Dynamic C installation folder.
docs
folder. To run the program,
SAMPLES
window will open and will dis-
STDIO
sample program to verify that the
menu, and
Compile
RabbitCore RCM3000