Hardware Requirements - RabbitCore RCM2000 Series Getting Started Manual

C-programmable module with ethernet

Hide thumbs Also See for RCM2000 Series:

Table of Contents

• Dynamic C provides extensions to the C language (such as shared and protected vari-

ables, costatements and cofunctions) that support real-world embedded system devel-

opment. Interrupt service routines may be written in C. Dynamic C supports

cooperative and preemptive multi-tasking.

• Dynamic C comes with many function libraries, all in source code. These libraries sup-

port real-time programming, machine level I/O, and provide standard string and math

functions.

• Dynamic C compiles directly to memory. Functions and libraries are compiled and

linked and downloaded on-the-fly. On a fast PC, Dynamic C can load 30,000 bytes of

code in 5 seconds at a baud rate of 115,200 bps.

3.1

Hardware Requirements

To install and run Dynamic C, your system must be running one of the following operating

systems:

• Windows 95

• Windows 98

• Windows NT

• Windows Me

• Windows 2000

3.1.1 Hardware Requirements

The PC on which you install Dynamic C for development of RCM2200-based systems

should have the following hardware:

• A Pentium or later microprocessor

• 32 MB of RAM

• At least 50 MB of free hard drive space

• At least one free COM (serial) port for communication with the target systems

• A 10Base-T Ethernet network interface port

(optional if you will not be using the RCM2200's Ethernet port)

• A CD-ROM drive (for software installation)

RabbitCore RCM2200

Table of Contents

Do you have a question about the RCM2000 Series and is the answer not in the manual?

Rcm2200