Introduction; Printer Firmware Requirements - Intermec EasyCoder PD41 Instructions Manual

Introduction

These instructions describe the various ways you can access and
set the network parameters on a PD41 printer equipped with an
EasyLAN Ethernet network card. The instructions apply equally
to a PD42 printer, but are less relevant since network parameters
can be changed directly from the printer display.
Once you have the printer home page up and running, please
refer to the EasyLAN User's Guide (P/N 1-960590-xx) for
information on how to navigate the web interface and modify
advanced network settings.

Printer Firmware Requirements

Before you begin, confirm that the printer is running either
Intermec Fingerprint v10.x.x or IPL v10.x.x firmware. If you
have a PD41 printer, the easiest way to check the firmware
version is to print a test label (for help, see the
EasyCoder PD41
(P/N )). If you have a PD42
Printer User's Guide 1-960652-xx
printer, information about the current firmware version is shown
in the display window when the printer is in idle mode.
EasyLAN Ethernet Software Instructions 5