Clarion DXZ948RMP Owner's Manual page 50

Operations Common to Each Mode
Using the security function
(CODEMATIC)
This function prevents persons who do not know
the touch sequence from easily operating this
unit. The Touch Code display appears when
DCP is attached and the power is turned ON
with "CODEMATIC" set to "ON".
If you touch the display in this screen in the
preset order, "SUCCESSFUL" is displayed and
the power is turned OFF.
When the power is next turned ON, the Touch
Code display does not appear, and the main
display in the radio mode or CD mode is
displayed.
1. Press the [A] button to set to the adjust
mode.
2. Touch on the setting item display to
select "CODEMATIC" under "SETTING".
ADJUST MODE
CODEMATIC
SETTING
2 types of items are displayed for
"CODEMATIC", items for which "ON" or
"OFF" is displayed at the right of the screen,
and items for which "INPUT" is displayed at
the right of the screen. Here, select the item
for which "ON" or "OFF" is displayed at the
right of the display.
3. Either touch
display, or turn the [ROTARY] knob to select
"ON" or "OFF".
4. Touch on the setting item display to
select "CODEMATIC" under "SETTING".
Here, select the item for which "INPUT" is
displayed at the right of the display.
5. Touch INPUT.
The Touch Code display appears.
6. Enter the touch code.
∗ Touch one of 5 locations (left, centre, right,
top right, or bottom right) of the display.
Each touch of the display lights one of the
Touch Code indicators.
∗ For example, touch (1) centre, (2) top
right, (3) left, and (4) bottom right, in that
order. You can also repeatedly touch the
same location.
When you touch 4 times, you will hear a
long beep, and the original mode is
returned to.
50
DXZ948RMP
ON
on the right of the
■ To cancel CODEMATIC
If you have forgotten the touch order, either
touch 1 bottom right, 2 left, 3 top right and
then 4 right in that order, or press [SCN] on the
remote control unit.
2
3
1
4