Clarion DXZ948RMP Owner's Manual page 49

Note:
• When connecting a hands-free kit, make sure
that the setting is ON to receive the telephone
audio through the system.
ON:
You can listen to your telephone calls from
the speakers connected to this unit.
∗ When listening to your calls on your car
speakers, you can adjust the volume by
turning the [ROTARY] knob.
MUTE:
The sound from this unit is muted during
telephone calls.
4. Press the [A] button to return to the previous
mode.
Setting the auto-volume
function
(CALIBRATE/A-VOL SENS)
You can automatically change the volume to
match your car's speed.
• The factory default setting is "LOW".
1. Press the [A] button to set the adjust mode.
2. Touch on the setting item display to
select "CALIBRATE" under "SETTING".
ADJUST MODE
CALIBRATE
SETTING
3. Accelerate to a speed of 50 km.
4. When you reach 50 km, touch START.
Calibration is executed.
After 2 seconds or longer, you will hear a
long beep, and "SUCCESSFUL" will appear
on the display.
If you hear a short beep, this indicates that
calibration failed. Repeat the procedure from
step 3.
Operations Common to Each Mode
5. Next, adjust the sensitivity. Touch
the setting item display to select "A-VOL
SENS" under "SETTING".
6. Either touch
display, or turn the [ROTARY] knob to select
the sensitivity.
Each time you turn the [ROTARY] knob, the
setting changes in the following order:
OFF (no change in volume) ➜ LOW
(change in volume: small) ➜ MID-LOW ➜
MID ➜ MID-HIGH ➜ HIGH (change in
volume: large) ...
7. Press the [A] button to return to the previous
mode.
Performing a system check
This function allows you to perform a system
check from the adjust mode when required.
1. Press the [A] button to set to the adjust
mode.
2. Touch
select "SYSTEM CHECK" under
START
"SETTING".
3. Touch and hold START for 1 second or
longer.
"System Check" appears on the display.
4. Press the [ROTARY] knob.
The system check starts.
When the system check is complete,
"Completed" appears on the display.
5. Press the [ROTARY] knob again.
The main display for the radio mode
appears.
ADJUST MODE
A-VOL SENS
SETTING
on the right of the
on the setting item display to
ADJUST MODE
SYSTEM CHECK
SETTING
on
LOW
START
49
DXZ948RMP