Clarion DXZ948RMP Owner's Manual page 16

Basic Operations
2. Touch A-MODE.
OFF
POSITION P. EQ
SOUND MENU
2 - ZONE ADF
OFF
3. Touch on the adjustment item display
to select "SW VOLUME" or "CTR VOLUME".
AUDIO MODE
SW VOLUME
4. Touch on the right of the display and
adjust the item as desired.
∗ This item can be adjusted within the range
-5 to +5.
5. Press the [SOUND] button to return to the
original mode.
Adjusting balance/fader
BALANCE:
Adjusts the volume balance between the left
and right speakers.
FADER:
Adjust the volume balance between the front
and rear speakers.
• The factory default setting for BALANCE is "0"
and for FADER is "0".
Note:
• Balance/fader cannot be adjusted when "PRO" is
selected at AC-PRO III (cf. page 44) and the
position function is set to "ON". Adjust balance/
fader by the "Selecting the position menu" (cf.
page 17).
1. Press the [SOUND] button.
2. Touch A-MODE.
OFF
POSITION P. EQ
SOUND MENU
2 - ZONE ADF
OFF
3. Touch on the adjustment item display
to select "BALANCE" or "FADER".
AUDIO MODE
BALANCE
16
DXZ948RMP
OFF OFF
Dolby PL II
RTN
A - MODE
OFF
RTN
0
OFF OFF
Dolby PL II
RTN
A - MODE
OFF
RTN
0
4. Touch on the right of the display
adjust the item as desired.
∗ "BALANCE" can be adjusted within the
range L13 (left side emphasized) and R13
(right side emphasized).
∗ "FADER" can be adjusted within the range
R12 (rear side emphasized) and F12 (front
side emphasized).
5. Press the [SOUND] button to return to the
original mode.
Adjusting bass/treble
The bass/treble mode can be adjusted only
when the Dolby Pro Logic II mode is set to
"OFF" (cf. page 17) and "EQ SELECT" is set to
"BAS/TREB"(cf. page 44).
• The factory default setting is "0".
1. Press the [SOUND] button.
2. Touch A-MODE.
OFF
POSITION P. EQ
SOUND MENU
2 - ZONE ADF
OFF
3. Touch on the adjustment item display
to select "BASS" or "TREBLE".
AUDIO MODE
BASS
4. Touch on the right of the display and
adjust the item as desired.
∗ This item can be adjusted within the range
-6 to +6.
5. Repeat steps 3 and 4 to adjust the desired
item.
6. Press the [SOUND] button to return to the
original mode.
OFF
Dolby PL II
RTN
A - MODE
OFF
RTN
0