Intermec EasyCoder 3400e User Manual page 8

3400, 4420, and 4440 Cutter User's Manual
3. From the Paper Handling dialog box, select Cutter.
4. Choose OK.
5. Choose the Send Command button.
6. Exit PrintSet.
Note: To disable the cutter, use this procedure but deselect Cutter at Step 3.
8
Note: If you want to change other configuration settings, you should do so before
going to Step 5. For help changing the configuration, see the Help menu.
A message box appears asking if you want to overwrite the current printer
settings. Choose send to enable the cutter with either the default printer
configuration or the configuration you have created.