Enabling The Cutter - Intermec EasyCoder 3400e User Manual
Cutter
Hide thumbs
Also See for EasyCoder 3400e:
- User manual (150 pages) ,
- Quick start manual (20 pages) ,
- Instructions manual (6 pages)
Advertisement
Enabling the Cutter
The following instructions use PrintSet to enable the cutter, but you can also
use the IPL to enable the cutter. For help, see the IPL Programming Reference
Manual.
1. Start PrintSet on your PC.
2. Click the Paper Handling button.
Note: Under the Printer Select menu, check that PrintSet is set up for your printer
configuration (3400, 4420, or 4440). To customize the configuration for your
printer, see the Help menu.
Enabling the Cutter
7
Advertisement
