Table of Contents
Advertisement
4. Installation
IOT-CPANEL can be placed on the desktop directly. If it needs to be fixed,please try below
installation methods.
Fixed by 3M Tapes:
Paste 3M tape to the back of the panel, then tear the other side and place it on a flat surface.
Please note the screen direction when installing.
Fixed by 86 Box:
Remove the back cover of the panel, screw the back cover to the 86 box with screws,
then install back the panel. Please note the screen direction when installing.
5. Device Payload
All data are based on the following format(HEX):
Channel1
Type1
1 Byte
1 Byte
5.1 Basic Information
IOT-CPANEL report basic information of panel whenever joiningthe network.
Channel
ff
01(Protocol Version)
Data1
Channel2
N Bytes
1 Byte
Type
01=>V1
Type2
Data2
Channel 3
1 Byte
M Bytes
1 Byte
Description
...
...
14
Advertisement
Table of Contents
