Table of Contents
Advertisement
select the frequency and spreading factor. (Default LoRa D2D Key: 5572404C696E6B4C6F
52613230313823)
3. Enable one of IOT-CPANEL button mode and configure a 2-bytehexadecimal command
(This command is pre-definedin LoRa D2D agent device). When you press this button, IOT-
CPANEL will send the control command to correspondingLoRa D2Dagent devices.
Note: When this feature is enabled, the control command from this button will not send to
®
LoRaWAN
gateway.
3.5 E-inkScreen Display Settings
IOT-CPANEL supports e-inkscreen display content programming according to user requirements.
1. Every button shows 1 to 6 numbers by default. Users can modify these numbers to any
characters or click "Custom" to import pictures.
2. After modifying or importing,click "Preview" to check the display result on the upper picture.
3. Click "Write", then attach the smartphone with NFC area to the device to complete the screen
programming.
4. Click "Save" to save the current display as a template in ToolBox App. You can import this
template to another device by clicking "Import Template".
10
Advertisement
Table of Contents
