Definitive Technology Studio 3D Mini Owner's Manual page 75

Contents Connections
Status Front LED action
(solid)
Error
(fast blink)
Reset
(fast blink)
Playback Settings
Rear LED action
There was a setup error. Check your usage environment,
then follow the correct procedure to try setup again. If the
error occurs again, restore factory settings and try setup
again. (v p. 65)
(solid)
There is a hardware error. Unplug the power cord, wait a
little while, then plug the power cord back in.
(off)
Factory settings have been restored.
(solid)
Tips Appendix
Description
75