Table of Contents
Advertisement
安装前注意事项
• 请确认包装内物品是否完整。如有缺失，请及时与
我们的客户中心取得联系。以上物品图片仅供参考，
以实物为准。
• 请仔细阅读以下说明。为避免伤害身体或损坏设备，
请按照说明一步一步安装设备。
• 根据最新的生产资料执行说明书。 我们保留更改规格、
包装权利，恕不另行通知。
• 因使用其他公司的任何零件而导致的任何故障，
我们概不负责。
• 使用环境温度：5℃-45℃。
• 进水水压范围：0.10MPa-0.75MPa。
• 进水口规格：G1/2"外牙。
安装说明
如下图，确认陶瓷马桶的孔距H，选择管夹
安装方式，获取对应冲水孔与排污孔的孔距。
（出厂默认135孔距安装）
Precautions before Installation
•
Please comfirm whether the contents of the
package are complete.If there is any missing,
please contact our customer center in time。
Image is for reference only, style varies by model.
•
Please read carefully the following instruction.
In order to avoid injuring body or damaging
equipment, please install the equipment following
the instruction step by step.
•
The instructions are complied according to the
up-to-date production information. We reserve the
rights to make the changes about specifications,
packaging without prior notice.
•
We shall not be responsible for any failure of
using any parts from other companies.
•
Ambient temperature: 5℃-45℃.
•
Inlet water pressure range: 0.14MPa-0.75MPa.
•
Water supply method: Ball valve G1/2.
Installation Notes
As shown in the figure below, confirm the hole
distance H of the ceramic toilet, select the pipe
clamp installation method, and obtain the hole
distance between the flush hole and the sewage
hole. (Factory default 135 hole pitch installation)
管夹上装时管中心距可调：135/145/150(三个固定位)
When the pipe clamp is installed, the pipe center
distance is adjustable: 135/145/150 (three fixed positions)
h=135
管夹下装时管中心距可调：165/155/150(三个固定位)
Adjustable tube center distance when the tube
clamp is installed: 165/155/150 (three fixed positions)
h=165
Advertisement
Table of Contents
