Related Manuals for Timotion TDH15
Summary of Contents for Timotion TDH15
- Page 1 Hand Control Programming- TDH15 20210811 error codes User Manual Hand Control Programming- TDH15 Version 3 August 2021 1 of 7...
- Page 2 Hand Control Programming- TDH15 Contents Contents ..................................2 Disclaimer .................................. 3 1. User Interface Guide ............................. 4 2. Reset ..................................5 3. Adjusting the Height ............................. 6 4. Setting the Upper and Lower Height Limit ......................6 5. Power Saving Function - Waking up the Control ....................7 6.
- Page 3 Hand Control Programming- TDH15 Disclaimer This user manual is ONLY for generic TiMOTION products. Manufacturers may have altered product settings causing them to differ from this user manual. Please contact the manufacturer for a revised manual if the product settings are different than this manual.
- Page 4 Hand Control Programming- TDH15 1. User Interface Guide Up and down buttons Version 3 August 2021 4 of 7...
- Page 5 Hand Control Programming- TDH15 2. Reset Simultaneously press ▲ and ▼ for 3 seconds. Continue pressing the buttons until both columns are in the lowest position. When finished with the reset, the control box will make a “beep” sound and the buttons can be released.
- Page 6 Hand Control Programming- TDH15 3. Adjusting the Height Press ▲ or ▼ button until the desk reaches the preferred height. 4. Setting the Upper and Lower Height Limit Setting the upper height limit: (1) Adjust the desk to the preferred upper height limit.
- Page 7 Hand Control Programming- TDH15 5. Power Saving Function - Waking up the Control The digital display automatically turns off if no buttons are pressed within 25 seconds. Press any button to light up the display again. The system goes into <0.1W standby mode if no buttons are pressed within 30 seconds.
Need help?
Do you have a question about the TDH15 and is the answer not in the manual?
Questions and answers