Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Eventide H9000
Summary of Contents for Eventide H9000
- Page 1 Instruction Manual State Variable Filter Revision 1.00...
- Page 2 Email: info@godlike.com.au Caution Ensure you have backed up all algorithms and other data of your H9000 prior to use of this product. You use these algorithms, chains, presets, sessions and/or other content entirely at your own risk and to all extents allowable under the law of Western Australia, Godlike Productions is not liable for loss of damage, direct, consequential or otherwise.
- Page 3 10134, or you can install it and use our H9000 Preset Tool to renumber your Presets to the location where you have installed this algorithms. If you have installed to 10134, copies at lower numbers can be safely deleted using Emote (see below).
- Page 4 If you do not wish to load presets, then you can use this algorithm as is. If you wish to use the presets, you will need to repeat this proceedure until this algorithm appears as algorithm 10134, or install it, and then use our H9000 Preset Tool. •...
- Page 5 • If you prefer, you can load it to any location, and take note of the location and then use our H9000 Preset Tools. • Presets cannot be loaded via VSIG. Install these either from Emote or from the front...
- Page 6 Getting Started Setting Things Up The diagram below shows the signal flow of this algorithm. # of Filters F1 Type F2 Type Cuto Frequency F3 Type Resonance Morph Multimode Type Stereo Stereo Input Filter Morpher Output PParameters Parameter Description Range Freq This determines the cutoff frequency, or centre fre- 0 - 20,000Hz...
- Page 7 Getting Started This algorithm is a state variable filter with adjustable frequency and Q. Up to 3 different filter types can be selected and the morph knobs allows smooth morphing between the 3 shapes to create unique filters. It is stereo in and out and both channels are processed independently, for true stereo.
Need help?
Do you have a question about the H9000 and is the answer not in the manual?
Questions and answers