Features - Epson IMU G Series User Manual

Features

2. Features

SMT socket 20x2 1 mm pitch connector Samtec CLM-110-02-L-D (mates with Epson G-series pin
compatible IMU)

SMT socket 20x2 0.4 mm pitch connector Panasonic AXE120224 (mates with Epson V-series
compatible IMU)

SMT header 20x2 1.27 mm pitch connector Samtec FTSH-110-01-F-DV (mates with OEM7
Development Kit)

PCB footprint for mounting 33 ohm 5% 0603 resistors to optionally connect OEM7 output signal
TIMEMARK or EVENT_OUT2 (mutually exclusive) to the Epson IMU GPIO2/EXT input pin.
2 Seiko Epson Corporation
Epson IMU_OEM7 Interposer Board
User Manual (Rev. 1.3)