Table of Contents
Advertisement
Basic Rack PDU User Manual
Installation
Before You Begin
Before installing your PDU, refer to the following lists to ensure that you have all the
items shipped with the unit as well as all other items required for proper installation.
Hardwire PDU installation instructions
This product is intended to be hardwired by the customer must be installed by a qualified
electrician AND adhere to all national & local electrical codes.
1. To install, remove the (4) securing screws on the removable user panel.
2. Unscrew strain relief grommet cap (indicated below) and feed the power cable
through the grommet cap & the input gland.
3. Ensure conductors are stripped adequately, exposing 15mm of copper.
4. Conductors shall be connected in-line with the terminal markings provided as
shown below (Line 1 = X; Line 2 = Y; Line 3 – Z). Ensure screws are secure for
each conductor by applying a torque of 2.3 N-m (20 in-lb.).
- 8 -
Advertisement
Table of Contents
