Equipment Overview; Model Numbering Format - Panduit Basic Rack PDU User Manual

Equipment Overview

The power inlet/cord(s) connects the PDU to the electrical power source. The LCD dis-
plays the current load for each input feed or electrical phase per input feed.
For IEC C-20 inlet PDUs, a customer-supplied cord is used for connection to the power
source. The connection end to the PDU has an IEC C-19 plug for connection to the
PDU.
The opposite end of the cord has a plug suitable for connecting to the customer-supplied
receptacle. The cord and plug shall be rated for 20A in North America and 16A outside
of North America. Make the connection to the PDU before connecting to the power
source

Model Numbering Format

This section describes the model numbering format used to identify equipment in the
PDU series. PDU model numbers are:
HD-YYYVZZA
l
HE-YYYVZZA
l
VD-YYYVZZA
l
VE-YYYVZZA
l
The letters in the series represent values as defined in the table below.
Letter
H Horizontal series
V Vertical series
D Basic - no monitoring or display provided
E Metered - on board display only
YYY May be any number, 120-415, representing rated voltage
ZZ May be any number, 10-63, representing rated current
Basic Rack PDU User Manual
What It Represents
- 5 -