Table of Contents
Advertisement
Internal Drives
The system supports one or two 2.5" fixed hard disk drives. The required parts, a mounting
bracket, two SATA cables, and two SATA power cables are included with the standard
"barebones" server.
Installing Internal Drives
1. Remove power from the system as described in Section 3.1, and remove the chassis
cover.
2. Mount the drives in the bracket, securing them with screws.
3. Secure the bracket onto the chassis floor.
4. Attach cables from the drives to the motherboard.
Internal HDDs
Hot-swap HDDs
Chapter 3: Maintenance and Component Installation
Figure 3-8. Storage Drives
45
Advertisement
Table of Contents
