Arlight SR-2501C Series Manual

SR-2804 with SR-2501C series
Product introduction
High sensitive & high stable Glass touch color wheel ,fast &precise color control
Ideal for natural white-warm white & cold white to achieve precise adjustment of color temperature and brightness
Each white can achieve 256 levels brightness adjustment , so there are millions of color temperature optional
Aluminum outer shell.
Rechargeable, With USB charging port.
Remote control with 20 meters control distance.
Memory function, remember the last kelvin after turn off/ or cut off
To work with power repeater to expand output unlimitedly
Receivers can work with RF-WIFI converter after installing software on IOS and Android system.
Parameter
Remote
Operation Voltage
Part No.
SR-2804 3.6VDC
Receiver
Iuput Voltage
Part No.
SR-2501C 12-36VDC
SR-2501CEA 12-36VDC
SR-2502C 12-36VDC
SR-2503C 12-36VDC
Product Size
114.2
RF CDW Dimmer
Operation DIMENSIONS
Frequency ø/h (mm)
434MHz/868MHz 40.8x114.2x7.5
Current Output
4x5A
4x(60-180)W
4x8A 4x(96-288)W
4x350mA
4x(4.2-12.6)W
4x700mA 4x(8.4-25.2)W
Brief introduction of buttons
Touch wheel for dim color
temperature of WW, NW, CW.
ON/OFF button
Dim down the brightness
of all channels
Dim down the brightness
of Warm white
Dim down the brightness
of Nature white
Dim down the brightness
of Cold white
Wiring diagram
Remarks
USB charging
Remarks
Constant voltage
Constant voltage
Constant current
Constant current
Operation
1. Check the power is enough to work, and it is charged by USB line.
2. Receiver Learning ID
After connect with LEDs well, learning the ID of the receiver, the purpose of learning ID code is to make the
receiver which can correspond the sender.
The method of Receiver learning ID is as follows: press the ID learning button
dicator is on, then press the color wheel on the sender, the indicator will flash a few times and then turns off,
then receiver ID is activated. If the ID activation is failed at the first time, please repeat the previous
procedures.
3. Touch the color wheel
4. Adjust the integral brightness via
Working status indicator, the sender is in dormant
status when the indicator is off. The sender is under
working when the indicator is flashing rapidly. If the
indicator continues flashing at the frequency of 1
second, it indicates that the sender batteries low and
needs to charge power.
Dim up the brightness of all channels
Dim up the rightness of Warm white
WW- WW+
Dim up the brightness of Nature white
NW NW
Dim up the brightness of Cold white
left indicator will be on when charging, middle indicator
is for reset switch, right one is for USB socket.
Power Supply
110V-230VAC
12-36VDC
SR-2501C
RF Easy Dimmer
WW
NW
CW
SR-2501C
RF Easy Dimmer
WW
NW
CW
SR-2501C
RF Easy Dimmer
WW
NW
CW
to get the color temperature you want.
.
on the receiver, the ID learning