Table of Contents
Advertisement
Troubleshooting Cont'd
Problem
Inaccurate wind readings
Display screen
not working
If your AcuRite product does not operate properly after trying the troubleshooting
steps, visit www.acurite.com/support
Specifications
TEMPERATURE RANGE
OUTDOOR HUMIDITY
RANGE
WIND SPEED
WIND DIRECTION
INDICATIONS
RAINFALL
WIRELESS RANGE
OPERATING FREQUENCY
POWER
DATA REPORTING
• What is wind reading being compared to? Pro weather stations are
typically mounted at 30 ft high or more. Make sure to compare data
using a sensor positioned at the same mounting height.
• Check location of the sensor. Ensure it's mounted a minimum of 5
ft in the air with no obstructions around it (within several feet).
• Ensure wind cups are spinning freely. If they hesitate or stop try
lubricating with graphite powder or spray lubricant.
• Check that the batteries are installed correctly. Batteries may
need to be replaced.
• Reset the display by pressing and holding the RESET button,
located in the battery compartment of the display. Date and time
will need to be entered after a reset.
Outdoor: -40˚F to 158˚F; -40˚C to 70˚C
Indoor: 32˚F to 122˚F; 0˚C to 50˚C
1% to 99%
0 to 99 mph; 0 to 159 kph
16 points
0.01 inches (0.25 mm) and up
330 ft/100 m
433 MHz
3 x AA alkaline batteries (required)
Wind Speed: 18 second updates
Direction: 36 seconds
Outdoor temperature & humidity: 36 second updates
Indoor temperature & humidity: 60 second updates
10
Possible Solution
depending on home construction materials
Advertisement
Table of Contents
