Listening With Speakers - Focusrite Audio Engineering vocaster one studio User Manual

EXAMPLES OF USE

Listening with speakers

Use the ¼' jacks marked Outputs R and L
to connect speakers. You can connect
powered monitors or an amplifier to these
outputs. Speaker volume is controlled by
the same knob used for headphones
volume.
The outputs are balanced ¼' TRS jack
sockets and provide line level. Small
powered monitors have unbalanced inputs,
typically a 3.5 mm jack plug intended for
direct connection to a computer. Separate
power amplifiers are likely to have phono
(RCA) sockets.
focusrite.com
Connecting to active speakers
Connecting to passive speakers
via an amplifier
Tell the world
You can also mute the speakers using
Vocaster Hub software. Click the speaker
icon in the top right of Vocaster Hub
software to toggle mute on (red) or off
(black)
NOTE: You can create an audio feedback
loop if your speakers are active at the same
time as a microphone! We recommend
you turn off your speakers while recording
podcasts, and use headphones for
monitoring.
19