Blodgett BX-14G Installation Operation & Maintenance page 46

Maintenance
Deliming
BCX WITH SMARTTOUCH 2 CONTROL
After 30 hours of boiler operation the control reminds you
delime your boiler. Press OK to acknowledge the remind-
er.
Figure 59
The message will return until the unit is delimed. This is a
warning only, the oven can be used all day before delim-
ing. The delime sequence can be run at anytime.
Deliming the Boiler with the SmartTouch 2 Control
1. From the power screen, press DELIME.
NOTE: If the oven is hot, place in the Cool Down
mode with the door open until the cavity is
below 140ºF (60ºC).
2. The control displays the current flush stage. To stop
the deliming process, press ABORT.
NOTE: Once the deliming process has been start-
ed, the oven cannot be used until deliming
is complete, approximately 45 minutes.
3. When complete, the control returns to the power
screen.
42
Figure 60
Figure 61