To Store Menu Data to a USB
NOTE: The following procedure may be used to store
any type of data to a USB including HACCP, set-
tings and fault logs.
1. Select STORE MENU TO USB.
2. Enter a filename for the menu data using the keypad
provided. Press the disk icon to save.
NOTE: DO NOT use spaces in the filename.
Figure 42
3. The status screen is displayed. Press OK when the
transfer is complete.
SmartTouch 2 Touchscreen Control
To Retrieve Menu Data from a USB
NOTE: The following procedure may be used to upload
menu recipes and/or icons from a USB.
1. Select LOAD MENU FROM USB.
2. Select the file to download to the oven.
3. The status screen is displayed. Press OK when the
transfer is complete.
35
Operation
Figure 43