®
Arize Element
L1000 Gen2
2.2 Selection of Mounting Hardware
Based on the cross section of the structural member select the correct hanger or mounting cable.
Unistrut 41 mm
Use standard hanger 41 mm
OR
Offset hanger 41 mm
to clear the bottom of the Unistrut
2.3 Installation with Hangers
Hang brackets of driver module
1
onto hanger and push down until
brackets snap into place.
Square 70 mm
Use standard hanger 70 mm
SNAP!
Hang driver bracket from one hook, then hang other driver
2
bracket end by pressing hanger arms together.
Other Structural Members
9
Installation Guide
Use 0.5 m universal cable