GE Arize Element L1000 Gen2 Manual page 13

®
Arize Element L1000 Gen2
3.3 Connection Schematic
Use proper circuit
protection level
AC line
Driver Input Wire
Colors
Brown = Line 1
Blue = Neutral or Line 2
Yellow/Green = Ground
WARNING
Ambient temperature surrounding
each driver must be lower than 40°C.
4 Connecting Wired Dimming (Optional)
RISK OF ELECTRIC SHOCK
Turn power off before installation, inspection, cleaning or removal. And follow appropriate lock out/tag out safety procedure.
Remove cap from dimming
1
connector.
3-Phase Y
*
N
L3
L2
L1
Driver Driver
REPEAT FOR ENTIRE CIRCUIT BALANCING OUT EACH PHASE
*Blue = Neutral or Line 2
Optional 914 mm or 1828 mm inter-connection cable
NOTE: Maximum cumulative length of inter-connection cable is 3.6 m.
WARNING
Plug dimming cable: align
2
keying features and push
connectors together until lock
ring has snapped into place
and a click is heard. To remove
dimming cable, turn locking ring
1/8 of a turn counter-clockwise
and separate connectors.
13
Installation Guide
3-Phase ∆
* *
Driver Driver Driver Driver
Light module
Dimming
Switch
+ (0-10V)
- (0-10V)
Connect the appropriate wiring
3
to Dim + (0-10V) and Dim –
(0-10V) from driver. Insulate
the black wire. Follow dimming
switch instructions for rest of
connection.
*The black/white wire is a 12V
auxiliary output that can support
up to 250mA of current.
Dimming
Cable
Black/White (12V)*
Purple
Pink