DeWalt DCLE34031 Instruction Manual page 16

English

WARNING: Since accessories, other than those offered
by D WALT, have not been tested with this product, use
e
of such accessories with this tool could be hazardous.
To reduce the risk of injury, only D
accessories should be used with this product.
If you need any assistance in locating any accessory, please
contact your nearest D WALT service center or go to
e
www.D WALT.com.
e
Target Card (Fig. V)
Some laser kits include a Laser Target Card (Figure V)
to aid in locating and marking the laser beam. The target card
enhances the visibility of the laser beam as the beam crosses
over the card. The card is marked with standard and metric
scales. The laser beam passes through the semi‑transparent
plastic and reflects off of the reflective tape on the reverse
side. The magnet at the top of the card is designed to hold
the target card to ceiling track or steel studs to determine
plumb and level positions. For best performance when using
the Target Card, the D WALT logo should be facing you.
e
SERVICE AND REPAIRS
nOTE: Disassembling the laser level(s) will void all
warranties on the product.
To assure product SAFETY and RELIABILITY, repairs,
maintenance and adjustment should be performed
by authorized service centers. Service or maintenance
performed by unqualified personnel may result in a
risk of injury. To locate your nearest D
center call 1‑800‑4‑D WALT (1‑800‑433‑9258) or go to
e
www. D WALT. com.
e
WARRANTY
Go to www.D WALT.com for the latest
e
warranty information.
14
WALT recommended
e
WALT service
e