Digitrax DZ126Z1 Manual

DZ126Z1
Fits AZL Z PA1 and
others

Features:

▪
Digitrax LocoMotion® System-Your locomotives look like the real thing.
The Digitrax LocoMotion System makes them run like the real thing, too!
Torque Compensation for smooth as silk silent operation.
128 Speed Step operation (14 or 28 steps can also be used).
Momentum with acceleration and deceleration.
Normal Direction of Travel is user selectable.
Switching Speed feature for easier and faster access to yard speeds.
3 Step Speed Tables set start, mid and max voltage for custom control.
28 Step Speed Tables with 256 level resolution for precise control.
▪
Scalable Speed Stabilization (Back EMF) with simple setup & 256 level
resolution.
▪
SuperSonic motor drive for silent operation.
▪
FX
Function outputs for prototypical lighting effects and on/off control:
3
Constant Brightness Lighting with directional or independent control.
Dynamic and Static Qualifiers operate functions based on direction, F0
on or off, loco direction and F0, and whether loco is moving.
Function Remapping for custom function setup.
Master Light Switch turns off all lights & functions with one keystroke.
Advanced Consist Function Controls
▪
Bright White LEDs for added realism.
▪
Transponder Equipped ready for transponding on your Layout.
▪
All Mode Programming, with Operations Mode Read Back-read of CV
values on the mainline using compatible Digitrax Transponding detectors.
▪
Decoder Factory CV Reset with or without speed table initialize.
▪
Motor Isolation Protection helps prevent damage to your decoder.
▪
Basic, Advanced & UniVersal Consisting.
▪
2 Digit and 4 Digit Addressing.
▪
DCC Compatible.
Parts List
1 DZ126Z1 Decoder
© 2022 Digitrax, Inc.
Complete Train Control
Run Your Trains, Not Your Track!
— 1 —
Mobile Decoder
DCC Board Replacement
2 FX3 Functions
1 Instruction Sheet
www.digitrax.com
Z Scale