Table of Contents
Advertisement
8 Maintenance Procedures
Microfilmer care
Cleaning the cassette
Cleaning the guides
36
Use of attachments that are not recommended may cause hazards and
serious damage to the equipment.
IMPORTANT: DO NOT use commercial cleaning solvents in any of the
following cleaning instructions.
Wipe the exterior of the microfilmer with a soft cloth, water-dampened if
necessary, to remove fingerprints, stains, or other soil marks. Using a
cloth, remove dust from the feeder and receiving area as required.
NOTE: Excessive dust levels may damage internal parts.
Before loading a new roll of film into the film cassette, remove dust,
debris, or other foreign material from the interior of the cassette.
Once a month, carefully clean the film drive roller and idler rollers with a
clean, water-dampened cloth.
Since documents are photographed through clear document guides, the
guides must be kept clean in order to maintain high-quality film images.
Inspect the guides for dust and smudges at each film change. Clean the
guides when necessary.
1. Turn off the microfilmer.
CAUTION: Any time the microfilmer cover is opened with the film
cassette installed, the film compartment latch must
be unlocked (by rotating the latch downward) to
prevent room light from exposing (fogging) the film.
2. Rotate the film compartment latch downward, until it locks. Remove
the cassette.
3. Lift the cabinet cover.
A-61036 July 2000
Advertisement
Table of Contents
