Clearing A Jam - Kodak Desktop 3 Microfilmer User Manual

Clearing a jam

20
1. Turn the microfilmer off.
CAUTION: Any time the microfilmer cover is opened with the film
cassette installed, the film compartment latch must be
unlocked (by rotating the latch downward) to prevent
room light from exposing (fogging) the film.
2. Remove loose documents from the feeder and receiving area. By
pushing down on the gap release arm, remove any remaining
documents caught between the feed rollers.3. Unlatch cassette.
4. Lift cabinet cover.
5. Remove documents from the upper transport by pushing the top
springs to the left and right and pushing the plate back.
NOTE: If an Endorser is installed, see Figure 19 for instructions.
Figure 12
6. Press the upper transport latch to the left; then lift up the upper
transport and remove any jammed documents.
Figure 13
A-61036 July 2000