Wiring Techniques; Connecting Wires To Terminals - Clarion DB625MP DB625MP DB625MP Owner's Manual

7. WIRING TECHNIQUES

Connecting Wires to Terminals

Rear right output (Red)
Rear left output (White)
Front right output (Red)
Front left output (White)
FM/AM antenna input
If no connections are made, do not
let the wire come out from the tab.
When using the
optional power
amplifier, connect to its
power control terminal.
Depending on what
antenna you are using,
connect either to the
control terminal of the
motor antenna, or to
the power terminal for
the booster amplifier of
the film-type antenna.
To car light control
switch
Ignition key
switch
Car fuse box
(Main fuse)
–
+
Battery
Fuse (10A)
P.CONT
Power control wire
(Blue/White)
ANT.
CONT
Motor antenna control
wire (Blue)
ILLUMI
Dimmer control wire
(Orange / White)
Ignition wire
ACC
(Red)
Battery wire
(Yellow)
Car fuse box
Ground wire (Black) -
(To car chassis)
Wiring harness
(Accessory 1)
White/Black
FRONT • L
White
Gray/Black
FRONT • R
Gray
Green/Black
REAR • L
Green
Purple/Black
REAR • R
Purple
DB625MP
To front left
speaker
To front right
speaker
To rear left
speaker
To rear right
speaker
21