Thank you for purchasing this Clarion product. Please read this owner’s manual in its entirety before operating this equipment. After reading this manual, be sure to keep it in a handy place (e.g., glove compartment). Check the contents of the enclosed warranty card and keep it carefully with this manual.
ENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTER- FERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. THIS PRODUCTION COMPLIES WITH DHHS RULES 21 CFR SUB-CHAPTER J APPLICABLE AT DATE OF MANUFACTURE. CLARION CO., LTD. 50 KAMITODA, TODA-SHI, SAITAMA-KEN, JAPAN. 051 722 877 MANUFACTURED: SERIAL No.
Note: Be sure to unfold this page and refer to the front diagrams as you read each chapter. Remarque: Veuillez déplier cette page et vous référer aux schémas quand vous lisez chaque chapitre. Nota: Cuando lea los capítulos, despliegue esta página y consulte los diagramas. DXZ525 4. NOMENCLATURE Note: •...
DCP is an extremely important part. Be careful not to damage it by press- ing on it with fingernails, screwdrivers, etc. Note: • If the DCP is dirty, wipe off the dirt with a soft, dry cloth only. DXZ525...
• Do not short-circuit, disassemble or heat batteries. • Do not dispose of batteries into fire or flames. • Dispose of spent batteries properly. DXZ525 Receiver for remote control unit Operating range: 30˚ in all directions Signal transmitter...
When pressed and held for 1 second: Disc scan play. Repeat play. Repeat play. When pressed and held for 1 second: Disc repeat play. Random play. Random play. When pressed and held for 1 second: Disc random play. CD/MD changer DXZ525...
AUX mode mode... External equipment not connected with CeNET is not displayed. DXZ525 Note:Be sure to read this chapter referring to the front diagrams of chapter “3. CONTROLS” on page 5 (unfold). Adjusting the volume Turning the [ROTARY] knob clockwise increases the volume;...
The factory default setting is “FAD 0”. (Adjust- ment range: F12 to R12) 3. When the adjustment is complete, press the [A-M] button several times until the function mode is reached. Basic Operations DXZ525...
“LOUD ON”(on) or “LOUD OFF”(off). When loudness effect is turned on, “LD”lights on the display. The factory default setting is “LOUD OFF”. DXZ525 Radio Operations FM reception For enhanced FM performance the tuner includes signal actuated stereo control, Enhanced Multi AGC, Impulse noise reduction curcuits and Multipath noise reduction circuits.
Recalling a station with ISR In any mode, press the [ISR] button to turn on the radio function and tune the selected radio station. “ISR” appears in the display. Press the [ISR] button again to return to the previous mode. DXZ525...
1. Press the [s] button to pause play. “PAUSE” appears in the display. 2. To resume CD play, press the [s] button again. DXZ525 Ejecting a CD 1. Press the [OPEN] button to open the FLIP DOWN PANEL. 2. Press the [Q] to eject the CD. Take it out from the ejected position.
2. Press the [a] or [d] button to select “CLOCK En”. 3. Press the [s] button. 4. Press the [a] or [d] button to select the hour or the minute. DXZ525...
Page 14
This unit requires special wiring to mute the au- dio signal automatically when a cellular tele- phone rings in the car. This function is not compatible wiht all cellular telepones Contact your local authorized Clarion dealer for information on proper installation and compatibility.
Press and hold for 1 second or longer the [DI- RECT] button (1 to 6) with the same number as the CD playing. If a CD is not loaded in a slot of magazine, press- ing the [DIRECT] button corresponding to its disc number is invalid. DXZ525...
2. To cancel repeat play, press the [RPT] button again. “RPT” goes off from the display and normal play resumes. DXZ525 Disc repeat play After all the tracks on the current disc have been played, disc repeat play automatically replays the current disc over from the first track.
Eject the compact disc before loading the new one. Clean the compact disc with a soft cloth. Replace with a compact disc with no scratches. Let dry for about 1 hour with the power on. Measure Reset button DXZ525...
MD changer. If an error display other than the ones described above appears, press the reset button. If the problem persists, turn off the power and consult your store of purchase. DXZ525 Cause This is a failure of CD deck’s mechanism and consult your store of purchase.
Harmonic Distortion: 0.01% Channel Separation (1 kHz): 85 dB Notes: • Specifications and design are subject to change without notice for further improvement. DXZ525 Audio Maximum Power Output: 200 W (50 W 4 ch) Continuous Average Power Output: 18 W...
0,01% Separación entre canales (1 kHz): 85 dB Notas: • Las especificaciones y el diseño están sujetos a cambio sin previo aviso por motivo de mejoras. DXZ525 Audio Salida máxima de potencia: 200 W (50 W 4 canales) Salida media continua de potencia:...
Need help?
Do you have a question about the ProAudio DXZ525 and is the answer not in the manual?
Questions and answers