Adjustment Menu - Clarion DB625MP DB625MP DB625MP Owner's Manual

Adjustment Menu

Adjustment Menu
Setting during operation beep sound etc. func-
tions.
The Adjustment menu basic operation method is
explained here. The reference for the Adjustment
menu items and their setting content is after this
operation explanation.
1. Enter Adjustment menu mode
Press the [ ] button for at least 1 second.
"MENU" is displayed.
2. Select the Adjustment menu item
Press the [FM] or [AM] button.
Example: When you want to set the beep
sound select the "Beep" display.
3. Set the Adjustment menu item
Press the [a] or [d] button.
Example: When "Beep" is selected, each time
the button is pressed it switches
"Beep ON" or "Beep OFF". Select 1
of them as the setting.
You can continue by returning to step 2 and
setting other items.
4. Exit Adjustment menu mode
Press the [ ] button.
Note:
• When other items that are applicable to the basic
operation method above are displayed afterwards
their setting content chart is entered. (Normally the
uppermost setting in the chart is the original set-
ting.)
Also, the explanation for items that aren't appli-
cable (<Manual Clock Adjustment>etc.) are en-
tered step by step.
Touch Sensor Tone
Setting the operation check sound (beep sound)
ON/OFF.
Display
"Beep ON"
"Beep OFF"
Manual Clock Adjustment
1. Select Clock Adjustment mode
2. Enter Clock Adjust mode
3. Adjust the hours
4. Exit Clock adjustment mode
Note:
• At the time of clock adjustment, when only a
DSI (Disabled System Indicator)
A red indicator will blink on the unit after the face-
plate is removed, warning potential thieves.
Selectable Illumination
Selecting the button illumination color as green
or red.
Switching Display Type
Setting
Setting the Display type.
Beep is heard.
Beep canceled.
Press the [FM] or [AM] button.
Select the "CLK ADJ" display.
Press the [a] or [d] button for at least 1
second.
The clock display blinks.
Press the [FM] or [AM] button.
Adjust the minutes
Press the [a] or [d] button.
Press the [ ] button.
change of the hour is made, it is not adjusted to
00 seconds. Only when the minute is changed, it
is adjusted to 00 seconds.
Display Setting
"DSI ON" LED flashes.
"DSI OFF" LED OFF.
Display Setting
"KEY GRN" The illumination color is green.
"KEY RED" The illumination color is red.
Display Setting
"DisplayD" Demonstration.
"DisplayA" Circle Display is play time.
"DisplayB" Circle Display is clock.
"DisplayC" Silent display type.
19
DB625MP