Configuring Modbus Network; Ip Settings Changed To Static Ip Confirmation; Ip Settings Changed To Dhcp Confirmation; Modbus Parameters Page - Proconx MODG-100 User Manual

The new settings are confirmed with the following page:
Figure 5.6: IP settings changed to static IP confirmation
Please write down the new IP address so you are able to communicate with the
device in the future!
Figure 5.7: IP settings changed to DHCP confirmation

Configuring Modbus network

The Modbus parameters for the serial line can be configured to match the serial line
configuration of the other Modbus network nodes.
Select the Configuration→Modbus Parameters sub-menu from the menu bar to
open the Modbus parameter settings which are shown below:
Figure 5.8: Modbus parameters page
UMMODG100-2201
Web browser based management
21