Table of Contents
Advertisement
43-633.fm Page 14 Friday, August 13, 1999 10:34 AM
ADJUSTING THE
HANDSET'S VOLUME
Roll the handset's volume control up-
ward to increase the volume you hear
through the handset, or downward to de-
crease the volume.
USING REDIAL
You can quickly dial the last number di-
aled. When you hear a dial tone, simply
lift the handset and press
If the number you dial is busy, you can
leave the handset off the hook and
press
REDIAL
to have the phone send a
hang-up signal and automatically redial
the number again.
Note: The redial memory holds up to 31
digits in the tone mode and 32 digits in
14
the pulse mode, so it can store long-
distance as well as local numbers.
USING TONE SERVICES
ON A PULSE LINE
Some special services, such as bank-
by-phone, require tone signals. If you
have pulse service, you can still use
these special services by following
these steps.
1. Be sure
2. Dial the service's main number.
3. When the service answers, press
4. When you complete the call, hang
.
REDIAL
MAKING A CONFERENCE
CALL
A conference call lets you have a three-
way conversation, joining
LINE 2
ference call, follow these steps.
1. Place a call to one party.
2. Press
3. Press the button (
TONE/PULSE
.
PULSE
. Any additional numbers you dial
are sent as tone signals.
up. The phone automatically resets
to the pulse mode.
in one phone call. To place a con-
HOLD
to put the first call on
hold.
LINE 1
for the line not in use, then place a
call to another party.
is set to
LINE 1
and
or
)
LINE 2
Advertisement
Table of Contents
