Related Manuals for Yard force LX CLT1
Summary of Contents for Yard force LX CLT1
- Page 1 LX CLT1 GY212304 20V CORDLESS FIRE STARTER Original Instructions READ & UNDERSTAND INSTRUCTION MANUAL Save all warnings and instructions for future reference.
-
Page 3: Table Of Contents
LX CLT1 Original Instructions CONTENT Intended use General safety warnings Product safety warnings Symbols Technical data Description of product Operation Maintenance and storage Troubleshooting CE declaration Power switch Mode switch Mode switch... - Page 4 INTENDED USE GENERAL POWER TOOL SAFETY WARNINGS This fire starter is intended for starting the fire on grill. It is designed for domestic 2. Recharge only with the charger specified by the use and is not designed for commercial, trade or industrial use. manufacturer.
-
Page 5: Product Safety Warnings
GENERAL POWER TOOL SAFETY WARNINGS PRODUCT SAFETY WARNINGS improperly or at temperatures outside of the specified measures reduce the risk of starting the appliance range may damage the battery and increase the risk accidentally. of fire. 6. Store the idle appliance out of the children’s 9. - Page 6 PRODUCT SAFETY WARNINGS PRODUCT SAFETY WARNINGS when not using your battery tool or when changing operation. If damaged, have the power tool repaired accessories. Following this rule will reduce the risk of before use. Many accidents are caused by poorly electric shock, fire, or serious personal injury.
- Page 7 PRODUCT SAFETY WARNINGS SYMBOLS Safety symbols additionally seek medical help. Liquid ejected from the The purpose of safety symbols is to attract your battery may cause irritation or burns. attention to any possible dangers. The safety symbols Service and their explanations deserve your careful attention Have your power tool serviced by a qualified repair and full understanding.
- Page 8 SYMBOLS SYMBOLS Denotes risk of personal injury or damage to the Batteries contain Li-ion. Do not dispose of tool waste batteries in domestic waste. Contact local authority to find out how to dispose of batteries. Read instruction manual before use WEEE symbol.
-
Page 9: Technical Data
TECHNICAL DATA PARTS DESCRIPTION Parts description (Fig. A) Model No. LX CLT1 1. Heat shield 2. Mode switch Rated voltage 3. Power switch 4. Handle grip Air Speed 56 km/h (35 Mph) 5. Battery compartment 6. Stand/Bottle opener Max Temperature 1470°F (800°C) -
Page 10: Operation
OPERATION OPERATION Charging the battery pack WARNING: Do not allow familiarity with products to make you careless. Remember that a careless fraction of a second is sufficient to inflict serious injury. NOTE: Remove the battery pack from the charger after it has been fully charged. NOTE: Battery should be fully charged before first use. -
Page 11: Maintenance And Storage
OPERATION MAINTENANCE AND STORAGE Do not use near combustible materials such as dry grass, leaves, and paper, which can WARNING: Always switch the product off, remove the battery and wait until the appliance is scorch and catch fire. completely cool down before performing inspection, maintenance, and cleaning work. DANGER! Use extreme caution when starting a fire. -
Page 12: Troubleshooting
CE DECLARATION TROUBLESHOOTING To the provisions of Council Directives Problem Possible causes Possible solutions MEROTEC GmbH Battery not installed Insert the battery again. Otto-Brenner-Str. 8, 47877 Willich, Germany device cannot properly. start. Battery not charged. Charge the battery. Declare that the product: Description: 20V Fire Start Repair by an authorized No Heat.